Index Color Separations

Over the last few years the latest and greatest “buzz” word is Index Color. Index Color is another way of doing separations for garments. First we had spot color, then advanced to process color, moved up to simulated process color and now…… Index Color.

What is Index Color?
Index color is a process where a design with lots of colors is reduced down to a limited color palette using Adobe Photoshop’s Index Color Mode. The process of “indexing” a design also converts the design to a diffusion dither random pixel pattern rather than halftone dot patterns. The design is separated and printed directly from Photoshop, or the file is brought into a drawing program for additional text or graphic elements.

Why Use Index Color?
The beauty of index color is that because the films have a random dot pattern there is less moir� pattern to the image and images are extremely easy to print. In fact you can use a wide variety of mesh counts and all purpose inks. Index color prints print much easier than process color and every print looks the same. It is also easier to color match with index color.

Index separations also work great and print equally as well on both light and dark shirts! This is what really gives the process appeal.

A great advantage to them is that there is finally a way to use all of the Corel Draw clip art (for you PC users). Since this art is in CMYK format, it has been traditionally almost impossible to convert the art to spot color. With indexing it is a snap.

The Bad News About Index Color
Although the process sounds great – there is a dark side. Generally index color wants to see at least six to eight colors in the color palette for the image to look correct. If too few colors are used there is a tendency to have a somewhat posterized look. Granted, if the design is a simple spot color image with simple gradations then less colors work. But, if the design is photorealistic you really need lots of colors. Some of the best shirt images that are from index color have eight to ten colors. This means that is all you have is a 4-color press, indexing may not be for you. A 6-color press would be the minimum.

Also, if the image is a critical photorealistic design it may be better to use traditional process color rather than index color.

How To Do It
Of course there are automated separation programs like FastFilms that will do index separations automatically, but, you can still do it yourself very easily with just Adobe Photoshop.

The following is a very simple step-by-step to doing indexed color separations for T-shirts. This section follows Photoshop version 5.0 and 5.5. It works basically the same in Photoshop 3.0 and 4.0.

  1. Scan and adjust the image as you normally would for a process color job. Lighten the midtones and shadows with the Tone Curve. Apply Unsharp Masking 150,1,6. You do not need to convert the image to CMYK. The image MUST be RGB. Since the image is converted to “pixels” the resolution of the scan IS the resolution of the final films. The scan resolution should be the same resolution that you want the final index separations to be. 120 to 160 dpi should be fine for most work. Use 180 to 200 dpi for more detailed photorealistic designs. If you want the image to have a hand stippled look use 80 to 100 dpi. It is helpful to oversaturate an image when indexing.

    If the image has smooth gradations add a little “noise� using the Noise Filter in Photoshop. Try a setting of 12. This will help eliminate the “worming� effect of pixels clumping together.

    If the image has a lot of dark shadows, use Color Range to select just the black of the image and lighten this a little. This will help compensate for overdarkening of shadow areas when indexing.

  2. Analyze the image for specific colors. Try to determine what colors should be in a limited color palette. Don’t forget Gray as a very important color that is not always an obvious part of a design.

  3. Make a duplicate of the original file for a work file and save the original. If printing on a black shirt make another duplicate of file.

  4. (Creating Underbase and Highlight White)
    If the image is going on black or dark shirt colors you will need TWO versions of the file. One version is the normal image. The second has black around the image (on a black canvas). This is called a Masked file and will be used for the underbase and highlight.

  5. To create the Masked file, mask around the design with black so it appears on the monitor the way you want it to appear on the shirt. The masking can be done with the Magic Wand tool, the Lasso tool, by airbrushing with black or by using the Pen tool. If using the Magic Wand, change the Background color to black and just delete the area that the magic wand tool selects.

  6. Save this file as NAME-MASKED.TIF.

  7. (Highlight White)
    If the job is going on a black or medium colored shirt you will need a highlight white.

    Select the RBG file in the “masked version.” Select just the white in the design (Select/Color Range). Use the Fuzziness slider to determine how much white you want. Make sure Invert is checked.

  8. Save this selection as a channel (Select/Save Selection). Name this channel Highlight White.

  9. (Underbase White)
    If you are going on a black shirt you will need an underbase white.

    Work with the same “masked” file you used for the highlight. Select the RGB composite. Select the entire image (Select All). Copy this selection to Clipboard (Edit/Copy). Make a New Spot Channel (Horizontal arrow in Channels Palette). Select new channel and Paste (Edit/Paste). You will now have a grascale of the full image along with the highlight white channel.

    Optional underbase enhancement:: If the image has a lot of red and royal blue areas you will need to increase the density of the underbase under these colors. For each color you want to boost: Use the eyedropper to select the color. Next, use Color Range (Select/Color Range) and adjust Fuzziness to pull the amount of color you need. Next, apply that selection to the Underbase Channel (Select/Save Selection/Choose New Channel/Intersect Selection).

  10. Invert the grayscale image and apply a tone curve of 10% to 90%. to darken the shadows and lighten the highlight areas. Play with this to give the image good contrast.

    At this point you have the underbase and highlight white in grayscale mode. These need to be converted to a bitmap diffusion dither (random square dots).

  11. Split these two channels appart (arrow in Channels palette/Split Channels).

  12. Convert each new file made from the channels to a bitmap (Image/Mode/Bitmap). Make sure it is set for Diffusion Dither and is the same resolution as the input.

  13. Leave these two new files open while you index the colored version.

  14. (Convert Main File to Index Color)
    Open the Main (unmasked) file.

  15. Convert the image to Indexed Color – Mode/Indexed Color. Palette/Custom, Dither/Diffusion.

    Note: In Photoshop 5.0 and 5.5 make sure to uncheck the Preview button. Also, move this menu out of the way so you can see your image. In 5.0 you can select best or fast. In 5.5 the % slider adjusts the quality. 100% is the best. If the image has a lot of solid spot colors check “Preserve Exact Colors.�

  16. The default color palette needs to be changed to all white. Click and drag over every color in the palette. When the Color Picker comes up, put 255 (white) in each box of the RGB section.

  17. Build a limited color palette for the design. Click on the first white box in the Color Table. When the Color Picker screen comes up, use the Eye Dropper to select a specific color in a design. Generally, if you have a wide range of one color (i.e. medium to dark blue) – select the darker area. The more colors available to print the better. Six to eight colors are almost a minimum.

  18. Continue building the palette until all colors are selected. Don’t forget black. Make sure to save this palette and give it a unique name. Say OK to Color Table.

  19. Preview the design. It may appear very posterized until you zoom in to see the image more closely. You can go back to the Color Table and change a color and see what effect it has on the image.

  20. Each “color” must now be made into a separate Channel. Zoom in to the design. Use Select/Color Range to select a color. Save this selection – Select/Save Selection – as a channel and name it and give it the correct Pantone display color. Do this for each color in the design.

    To assign the proper Pantone color to a channel: after you have made the selection a channel (make sure you are still selected on the RGB image), hold down the Control key (Option on a Mac) and double-click on the channel. Click on the Color square and “sample� the color from the Foreground Color. Select Spot Color, Opacity 5% and Custom (to assign the nearest Pantone color).

  21. (Previewing the Image)
    Create THREE new channels. Name one, Shirt Color and fill it with Black at 100%. Name the second one Underbase White, 85%, white. Name the third, Highlight White, 100%, white.

  22. Go to the Underbase file that was created earlier. Select ALL and Copy the channel to the Clipboard.

  23. Go to the Main File, select the Underbase channel and Paste the image into it.

  24. Go back to the Highlight White file. Select All and Copy the channel to the Clipboard.

  25. Go to the Main File, select the Highlight channel and Paste the image into it.

  26. Move the Underbase channel to display after the Shirt Color channel.

  27. Move the Highlight White after the last color and before the Black.

  28. Click on each individual channel and make it a Spot Color.

  29. Place the Eye next to each channel. It is much easier to preview the design with each channel in the correct color. By placing the “eye” next to each channel in the Channels Palette you will see exactly how the design will look on a shirt. You can rearrange the colors to see what effect a different sequence has.

  30. (Outputting File)
    Since the image is now a diffusion dither and no longer a grayscale you DO NOT need to specify a Frequency or Angle when printing. Print out each channel directly from Photoshop.

  31. If additional graphics are needed, the channels will need to be Split, converted to a bitmap – Mode/Bitmap 50% Threshold and saved as an individual TIF file. Import these files into Corel Draw (PC), Adobe Illustrator, Macromedia Freehand (MAC) or Quark Express (PC or MAC) for addition of graphics and printing. In the drawing program delete the background color making the bitmap image transparent. You can then apply the correct Pantone color to the image and stack the import files to proof the design on screen.

    Screen Making, Inks and Printing
    Index color seps can be exposed onto meshes ranging from 180 to 305 (70-120 cm). Use 280-305 (110-120 cm) if you used 200 dpi for the resolution. White underbases can go from a low of 180 (70 cm) to a high of 230 (90 cm). Use all purpose ink for general colors and high opacity white for underbases. For light shirts, try to print the lighter highlight colors last in the sequence if possible and flash half way through if possible. Obviously if there is an underbase it will need to be flash cured.

    Each job will be different and the print order will change the look of the image. Play with sequences and ink opacities.

    The Secret!
    The secret to a good index job is to have the print look terrific on it’s own and to not worry about matching the original exactly!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s